Sign up to get your dose of Inspiration and DIY Furniture Painting Tips!

Salvaged Inspirations

DIY FURNITURE PAINTING

Salvaged Chairs into DIY Frames

March 10, 2020 by Denise - 61 Comments

Pin24.2K
Share
Tweet
WhatsApp
24.2K Shares

HOW TO TURN DATED SALVAGED CHAIR BACKS INTO DIY FRAMES.

It’s Trash to Treasure Tuesday and I’m thrilled you’re here! If you’re new to the #siblog, every second Tuesday I join 4 of my talented friends for a T2T party. I can’t wait to see what they’ve been up to this week. But first, here’s my trashy dated chair backs that I turned into DIY Frames!

Free Old Chairs Salvaged

If you’ve been part of my #sifamily for the last year, you may recognize this before. These salvaged chairs have gone through a good few makeovers over the years. I’m finally using one of the last pieces of these chairs for today’s makeover.

Salvaged Chair Backs - Before

What do you think? I know I’ve said it a thousand times, but I’m always AMAZED at what a little paint can do!

Salvaged Chair Backs into Frames

Salvaged Chair To DIY Frame Before and After

THIS POST IS SPONSORED/CONTAINS AFFILIATE LINKS TO PRODUCTS I USE.  YOU CAN SEE MY FULL DISCLOSURE HERE.

SOURCE LIST

TOOLS

CHAIR BACK TO FRAMES

I see dated chairs similar to this in the thrift store ALL the time. I’ve created Easy DIY Risers and Candle Holders from these exact chairs just to name a few projects, but I have to admit these frames might just be my favorite.

STEP #1:: Clean and Sand

I started by giving these chair backs a good cleaning because they were super dusty from hanging out in my paint room for over a year.

Cleaning Chair Back Frame

STEP #2:: Remove Nails

Originally, there were a ton of nails holding in the upholstered back. To be safe, I removed them with these needle pliers before doing any more work. This wasn’t fun. There were A LOT of nails!

Removing Nails From Chair Back Frame

STEP #3:: Fill Nail Holes and Dings

I used Dixie Belle’s Mud filler to fill in the nail holes and dings.

Filling In Nails Holes w Dixie Belle Mud

STEP #4:: Cut To Size

A little overkill but I had my Miter Saw out a ready to go so I used it to trim the ends and remove the dowels. A hand saw would work just as well in trimming off the ends. 🙂

Cutting Chair Back

STEP #5:: Prime & Paint

After sanding down the wood filler and trimming the edges to size, I sanded down the surface and applied this primer/sealer. The frames were painted in Fluff and then I dried brush the tops in Sawmill Gravy.

Painting DIY Frames in Dixie Belle Fluff

STEP #6:: Drill Hole On Back

For easy hanging, I drilled a hole in the back of the frame.

Drilling Hole in Frame

After finding these botanical prints in my stash, I cut them to size and attached them to the back with tape. I like that these prints are interchangeable depending on my mood or the season!

DIY Frames and Floral Prints

DIY Frames from Chair Backs

Salvaged Chair Backs into Frames

And now for some TRASH TO TREASURE FUN!

I know you’re going to LOVE what this talented team of ladies share… they never cease to surprise me with their creativity! Below are their BEFORE photos – visit the links underneath to see the amazing AFTERS and to learn how they did it! I’m heading over to take a peek right now myself! x

Trash To Treasure befores 20200310

1. Prodigal Pieces

2. Girl In The Garage

3. Artsy Chicks Rule

4. Confessions Of A Serial DIYer

5. Salvaged Inspirations (so happy you’re here!!)

LET ME KNOW WHAT YOU THINK OF THESE UPCYCLED DIY FRAMES… OR FEEL FREE TO ASK ANY QUESTIONS YOU MAY HAVE… I ALWAYS LOVE HEARING FROM YOU. IT MAKES MY DAY! 🙂

Happy furniture painting my friends!

Denise x

PIN AND SHARE!

Salvaged Chairs into DIY Frames before and After

RELATED POSTS::

DIY Wooden Candle Holders

Easy Wood Tray Risers

Granny Chair Makeover

DIY Chair Upholstery

Chairs For Charity

How To Paint Spindles WITHOUT Brush Marks



Pin24.2K
Share
Tweet
WhatsApp
24.2K Shares

Reader Interactions

Comments (61)

  1. BELLA, BUEN DIA!!! CUANTA CREATIVIDAD Y BELLEZA…TE QUEDARON FANTASTICOS, ME ENCANTAN COMO QUEDARON GRACIAS POR COMPARTIR

    Reply

  3. My Gosh! I couldn’t believe my eyes when I read the post title! This is one phenomenal idea and now I am sad I let my my mom threw away her old chairs!!! Fantastic job! Pinned it!

    Reply

  4. Aww! I love the way you utilized the old chairs to make a beautiful piece of art. I have a pair of the same as these chairs in my backyard. I am going to give it a try on next weekend to make these frames for the wall of my sunroom.

    Reply

  7. Denise your eyes see things that most would never you’ve got a God given talent. Fabulous!

    Reply

  8. I never would have thought to use a chair back for anything other than a chair. Your creativity is inspiring. Thanks for sharing Denise ~ Nicki

    Reply

  15. Holy cow! These are gorgeous! I will be looking at chairs at the thrift store with a new prospective from now on! Genius!

    Reply

  17. I LOVE this project! When I first saw the chairs, I thought to myself “what is she doing”. I love to upcycle and my friend, you nailed this one. Keep up the great work. xo

    Reply

  20. Your imagination knows no bounds! Whoulda thunk?
    Now I want to see what your imagination is going to think up for the rest of those chair parts! 😊

    Reply

    • Hi Janina and thank YOU! There aren’t many parts left of this chair. It’s pretty much been picked over and upcycled.🤣I included the other projects in the Related Posts section.😊

      Reply

  23. THese are great and such a great vision to dismantle the chairs! The botanical prints are perfect and fun that you have more to change out as your moods move you!
    Do you have a vision for the seats?

    I’d asked before about the brick background in a side video and it showed up today in your video of whitewashing the staging chair for these chair backs.it looks black and i think i’d asked if you had painted the bricks black and then white washed them. It’s not the typical red peeking through.

    Reply

    • Hi Gwen!!! The seats for these old dining chairs are MIA and I don’t recall if it was me that got rid of them or if I found them that way?? I did create a really cute riser from the other chair seat and spindles from the dining chairs though. 🙂 The brick wall was put up by the previous owners and it’s a grey/black/white brick. It also has some paint blotches on it because I test my sprayer on my walls before spraying my furniture.😁

      Reply

  24. I love them!! They make perfect frames……and not your everyday ones for sure!! Thanks for sharing these beauties!!

    Reply

  27. Hi Denise. I LOVE that you reused and up-cycled so many different parts of these chairs! Beautifully done:). These frames are simply adorable. You inspire me to take a second look at things I have in my own home and give them new life.

    Reply

Leave a Reply to Denise Cancel reply

Your email address will not be published. Required fields are marked *

24.2K Shares
Pin24.2K
Share
Tweet
WhatsApp