A STEP BY STEP HOW TO GLAZE FURNITURE | A LITTLE PAINT AND GLAZE RESCUES THIS DINGY LOOKING CONSOLE TABLE
Hi guys, I’m so excited about today’s makeover! It’s the very first time I’m joining my Furniture Fixer Upper friends and I can’t tell you how thrilled I am to be included in this talented group of ladies. I’ll be sharing their makeovers and tutorials at the bottom of today’s post, but first I’m sharing this salvaged dingy console table that’s been painted and glazed to perfection!
I found this vintage console table on Facebook Market Place. The table was solid and well built, but looking a little dingy. Nothing a little sanding and paint couldn’t fix up though…
Before I get into how the whitewash glaze worked its magic, here’s what this console table looks like now. What do you think?
THIS POST IS SPONSORED/CONTAINS AFFILIATE LINKS TO PRODUCTS I USE. YOU CAN SEE MY FULL DISCLOSURE HERE.
SOURCE LIST::
HOW TO GLAZE FURNITURE::
I use to be able to buy a gallon of glaze and then mix it with ANY paint color to create a DIY glaze. Unfortunately, I’ve searched numerous places including Sherwin Williams, Benjamin Moore, Home Depot, Lowes etc, and no one sells it anymore. Luckily, plenty of paint companies make ready-mixed glazes in a variety of colors.
Today I’m sharing how Dixie Belle’s Whitewash Glaze gives this console table a whole new look!
STEP #1:: Clean and Sand
I started by giving this piece a super good cleaning with vinegar and water. Then I sanded it from top to bottom to even out the surface and help smooth out the surface scratches.
STEP #2:: Prime To Stop Bleed Through
The quickest way to stop bleedthrough and carry on with painting is to use BIN Shellac Primer. It’s not the most pleasant to use. The fumes smell and it requires good ventilation. But it dries VERY quickly! Within 20 minutes its dry to the touch and can be recoated or painted within 45 minutes.
My favorite part about BIN Shellac, once I don’t see any bleedthrough showing through the primer (usually 1-2 coats) I’m 100% sure it will NOT pull through once I topcoat.
STEP #3:: Paint
I applied 2 coats of Driftwood, a soft beautiful neutral gray.
STEP #4:: Clear Coat in Satin {TIP}
Chalk and mineral paints are very porous and tend to absorb glazes like crazy. This works great if you are looking for a dramatic glazed look (dark grunge or heavily antiqued look for instance) but I wanted a softer glaze. A light glaze to add texture and dimension but not be in your face. A tip to get this look is to clear coat/topcoat BEFORE applying the glaze. One coat is all that’s needed and the difference is night and day!
STEP #5:: Apply Glaze and Rub Back
Now for the fun part! I used Dixie Belle’s Whitewash Glaze and applied it with a paint brush. Glaze can also be applied using a sponge brush, sponge or lint-free cloth. Whatever you feel comfortable using.
I work in small areas at a time brushing on the glaze and then wiping it back with a shop towel.
You can manipulate it while it’s wet leaving more glaze in the creases and ornate details and wiping more off on the flat surfaces.
Another little tip I find helpful is spraying/misting water on the bristles of my paintbrush before dipping into the glaze and applying. It helps the glaze slide and apply even better. 🙂
Here’s the difference the glaze makes…
STEP #6:: Clear Coat For Protection
The final step for this table was to add two more coats of Satin Clear Coat for protection. I also find that once the topcoat is over the glaze, it adds incredible depth and looks amazing!
And now for some FURNITURE FIXER UPPER FUN!
I know you’re going to LOVE what this creative team of girls do. It’s inspiration and techniques six-fold! 😉
Below are their BEFORE photos – visit the links underneath to see the amazing AFTERS and to learn how they did it! I’m heading over to take a peek right now myself! x
3. Confessions Of A Serial DIYer
LET ME KNOW WHAT YOU THINK OF THIS SALVAGED GLAZED CONSOLE TABLE… OR FEEL FREE TO ASK ANY QUESTIONS YOU MAY HAVE… I ALWAYS LOVE HEARING FROM YOU. IT MAKES MY DAY! 🙂
Happy furniture painting my friends!
Denise x
RELATED POSTS::
How To Apply Furniture Transfers
Adding Graphics | Vintage TeaCart Makeover
Pottery Barn Knock-Off Buffet Makeover
Stop Bleed Through When Painting
5 Ideas To Update An Old Desk
PIN AND SHARE!
Hi, You mentioned in your article that you used to make your own glaze for furniture. I have a whole gallen of Ralph Laren wall glaze that I bought some time ago but never opened. Can I use this on furniture? Would the ratio of paint to glaze be the same for furniture compared to using it for the wall? What recipe did you use to create glaze for furniture when glaze was available?
Thanks.
Rosie
Hi Rosemary! Yes, you sure can use a wall glaze for furniture! I would recommend reading the instructions on the can and starting with that. Then the recipe can be altered in accordance to the look you’re after. More paint for a more pronounced look, less paint in the glaze for a more subtle look.
Thank you so much!!!
Usually i used to discard or sell off my old furniture , this totally makes sense . i will certainly try this out this weekend
I’ve often visited your site via Pinterest, but just had to drop by and say amazing transformation and an amazing table 🥰
Oh, I’m so glad you dropped in Nicci! Thanks so much! XO
Denise, Your website was the first I turned to for a problem I have on my current project. I am making a sign and whitewashed the background. The wood is called Finger joint panel. When that was dry, I sanded it and then glazed it with an antique glaze, wiping with a damp cloth as I went. Now it looks splotchy. Can you think of a solution to fix the splotchiness? I’m afraid I’ll just have to paint the background now. Thank you for any advice you can give me.
Hi Kathy! hmmmm… I’m guessing it’s bleedthrough, or maybe it looks blotchy because its a finger joint panel with different hues? I’m really not sure. Sometimes it’s challenging to answer when I can’t see it. Feel free to send a pic tho. 🙂
Do you do a light sanding after the 2nd coat of BIN Shellac Primer? Sometimes the primer coat will have brush marks which may show through the paint. Do you use a paint sprayer on most pieces?
Hi Mary! For sure, sanding between coats gives amazing results! For this piece, I used a high-density roller to apply the BIN Primer so there were no brush marks. And I LOVE using my paint gun, but no, I actually hand paint most of my pieces and use the sprayer maybe 10-15% of the time. It is really fun for a change though!😃
I agree with everyone here, great tutorial and great job! My question is if I have an antique china cabinet that I just want to white wash and not paint is it possible to use your technique on a simple cleaned piece or would that just be a waste of time?
I wish I could give yay or nay answer Eva but it really depends on the existing finish of your china cabinet. These glazes are water based so if it were my cabinet, I would try applying some glaze in an inconspicuous area to see how it looks and how it reacts. A light sanding might also be beneficial, but that said, depending on the existing finish – that may cause some bleed through. ?? Sorry, I know that’s not a clear answer.😕
I recently bought VALSPAR Clear Mixing Glaze, 1 pint size at Lowes in Carson City NV. Not sure if they carry the gallon size. I prefer clear since you can use to mix any color you want.
I’ve been to the Lowes here in Toronto (GTA) and they didn’t sell it. 😐 I’ll have to take another look. Thank so much for this Mary!!
I just bought the same glaze at Lowes in NC. Maybe Amazon instead of running around.
Thanks for this Diane! 🙂
Denise, this table was such a sweet find and you made it stunning! I love the soft gray with the tinted glaze (and the wall art is gorgeous too!). So happy to have you join our Fixer Upper group – I can’t wait to see what other masterpieces you’ll create! xo
Thanks Jen! It was a fun find and project. I’m on the hunt for my next Fixer Upper. So happy to be part of the ‘clan’!😄
This table would be a perfect addition in behind my love seat which separates our family room from our kitchen. I wish I lived closer because I’d pick it up in a heartbeat! I absolutely love it!! And congratulations on joining the Fixer Upper Furniture group. I’ll have to go check it out. ~ Nicki
Thanks so much Nicki! Wish you lived closer too.🤗
This group of gals are so talented! Love the table! Does the glaze come on different hues or shades? I really want to lighten m maple cabinets but so afraid of paint. Glaze looks like a good choice. Do you think I need to sand the cabinets? I’ve been dreaming of a solution for a couple of years.
Very talented! I’m so happy to be part of the ‘fixer-upper-crew’.😊 Your kitchen cabinet, hmmmm, well I think it will depend on what type of finish is on them now Cecilia. If they were my cabinet, I might try a area of glaze say on the back of a door. Just to make sure the glaze adheres onto the finish and if you like the look. It may well benefit from a light sanding before you apply the glaze, but then again, if you’re using say a white glaze, you might get some bleedthrough ??? Really hard to say when dealing with an older exister finish. Sorry, I know that’s not a straight forward answer.😕
Great tutorial Denise! The table is dreamy. Those details…….can’t pass on a piece like that. They are hard to find. I love the finished look.
Thanks so much Kathy! Just as you said, I couldn’t pass on these details and I try not to let ‘dingy’ distract me when I picking pieces.😆
This table looks amazing now! What a huge difference! I am looking forward to all that you share with the group!!
Thanks you so much Kaycee! XO
FYI Fusion Mineral paints sell a clear glaze – you mix any colour you want to it. And I too work for a Benjamin Moore store that sells clear glaze as well Definitely check individual stores. Love all your inspiring stories! 😊💕
Hi Cynthia!! I didn’t know Fusion had a clear glaze, thank you! And yes, I’m going to be double checking the BM stores around here.😊
I recently bought Valspar Clear Mixing Glaze at Lowe;s in Carson City NV, 1 pint size, not sure if they carry
the gallon size. I used a little for a sample of grey wash over white, It worked very well.
Hi Denise! I’m so happy to know I can get my “Salvaged Inspirations fix” five times a month now! You have no idea how thrilled I was to see your email this morning. The Fixer Upper group is on my must-do list to check out this week. I absolutely love how this little decorative table turned out. You weren’t lying when you said it looked dingy, but all it needed was some creative TLC and now it’s a beauty. Amazing transformation.
That makes me so happy, thank you! And glad you like the table. I’m always amazed at how a little paint, product and TLC can transform just about anything!💕🌸
Beautiful makeover! Fyi Modern Masters has a tintable glaze which is excellent. I mix it 50/50 with paint and then can thin further with water as desired.
Appreciate this Julie! Having premixed glazes are nice but when you need a custom color – I really miss mixing my own. Thank you! x
Hi Denise, I work for a Benjamin Moore in BC and we still carry glaze. All Benjamin Moore store are owner operated not franchised so they can carry any non-branded BM products they like. Our store carries the SamaN line (Canadian product) and they have a glaze so maybe check for a retailer in your area. I particularly love their products and would recommend them to anyone who asks.
Oh and congrats to becoming part of the furniture fixer upper group 🙂
YES! Annie THANK YOU! The BM stores around here are all individually owned so I’ll make my rounds and ask! 🙂
I’ve been wanting to try the white glaze and this result is exactly the softened version of this look I’ve been envisioning for a particular project. Thanks for presenting uses of the wider Dixie Belle products beyond the paints!
My pleasure Stella and thank YOU! This whitewash glaze is really versatile too. If you want a stronger/heavier looking wash, you can apply a second or even third coat!😊
Oh, I love the softness of the wash. Beautiful makeover, Denise! xo
Thanks Do! And hey, CONGRATS!!!🎉 A tour, how EXCITING! If you guys tour Toronto I’m so there!!!💜
This looks so pretty now! I love the soft look and your photos with the plants is just gorgeous too!
thanks Kandice! I’m getting back into house plants again. For a while there, I was horrible at keeping them alive but they’re back to getting love and care again. XO
CONGRATS, you deserve the recognition! Sounds like a fun & INSPIRING talented group to be a part of. Is there a separate Blog for the Furniture Fixer Uppers? I googled and found something at Charlotte’s House. Please give us the link if there is one. . Love your white wash project, more great ideas. Your used furniture finds are awesome, especially your Curbside Orphans. .
Hi Mary! There’s no separate blog or link for the Furniture Fixer Uppers. Once a month (usually the 4th Thursday of every month) we all pick a fixer upper piece and then share all our projects at the end of the post so you can link through and visit.😊
Well if you love them that much, I’m going to have to check them out! Great endorsement!
I know they’d love that! Thanks Pat! XO
Such a pretty soft grey paint color and the whitewash glaze adds so much dimension to the console table. Very pretty! So thrilled to have you join our group, Denise! xo
Thank you Marie! It was a fun project and I’m thrilled I get to share it with the Furniture Fixer Uppers group! woohoo 🙂
So beautiful. Love the soft gray and the whitewash is perfection!
Thanks, my friend! XO
Welcome to the tribe!
Boy was that an ugly table to start with! i love the color and the glazing and thanks for the tutorial too!
Hi Gwen! Thank you for the welcome! And ya, it was kinda ugly, wasn’t it?! LOL
Really great job! Lots of steps, but appreciate the detail.
Thanks, Cathy!🤗
Hi Denise!! I’m so excited to see you here!. I love this little table and i have not tried the white wash yet. I will definitely try it . I love the look it gives. What is your favorite DB brush? Looking forward to next weeks makeover. Can you please tell me what a URL is? I don’t have my own website so i’m not sure what to put in that little box.
Thanks so much Cheryl! I really like the glazed look too… it really updates a piece while adding interest rather than just a flat paint finish. My fav DB brush is the short MINI… LOVE IT. And a URL is a website address. Just like your home has an address so people can locate you on a street, websites have their specific addy so people can locate them online. No need to fill it in if you don’t have a website… saves you a step…lol.😉
Love it, So beachy looking. Congratulations on joining a fun & creative group of bloggers.
Thanks, my friend! I was super happy to have been asked.💙
What a beauty this is now!! The glaze adds so much more depth and I just love it! So thrilled you’ve joined our group, my sweet friend! XOXO
Thanks and I’m SUPER thrilled to take part! I’ve followed you guys for so long its an honor! XO